|
|
|
|
|
|
|
Maple Bench Tops
|
|
|
|
|
These maple bench tops are manufactured of the finest grade northern grown maple. The lumber is seasoned and then kiln-dried to a moisture content of six to eight percent. Strips of lumber are then electronically laminated with a special tight bonding glue to create a smooth surface. The tops are finished to a thickness of 1-3/4" or 2-1/4". Natural finish.
|
|
|
|
|
1-1/4" MAPLE TOPS
24" Deep
48" W
60" W
72" W
96" W
120" W
144" W
30" Deep
48" W
60" W
72" W
96" W
120" W
144" W
36" Deep
48" W
60" W
72" W
96" W
120" W
144" W
2-1/4" MAPLE TOPS
24" Deep
48" W
60" W
72" W
96" W
120" W
144" W
30" Deep
48" W
60" W
72" W
96" W
120" W
144" W
36" Deep
48" W
60" W
72" W
96" W
120" W
144" W
|
Model 72448
Model 72460
Model 72472
Model 72496
Model 724120
Model 724144
Model 73048
Model 73060
Model 73072
Model 73096
Model 730120
Model 730144
Model 73648
Model 73660
Model 73672
Model 73696
Model 736120
Model 736144
Model 92448
Model 92460
Model 92472
Model 92496
Model 924120
Model 924144
Model 93048
Model 93060
Model 93072
Model 93096
Model 930120
Model 930144
Model 93648
Model 93660
Model 93672
Model 93696
Model 936120
Model 936144
|
|
TWO STATION MAPLE TOP
Top is 64"W x 28"D x 2-1/4" thick.
Model L-5
Size is 64"W x 54"D x 2-1/4" thick.
Model L-4
|
|
MAPLE BACK AND END STOPS
Back and end stops are available to fit any top length or thickness. Constructed of 3/4" solid maple, the curbs are pre-drilled and complete with fasteners. Increases overall top height 4". End stops increase overall length by 1-1/2".
|
|
BACK STOPS
60"W
72"W
END STOPS
24"W
30"W
|
Model WBS-60
Model WBS-72
Model WES-24
Model WES-30
|
|
IRON EDGES
Painted angle iron edges can be fitted flush to any bench top edge. Iron size is 2"W x 2"D x 1/8" thick.
|
|
CEDERQUIST JOINT FASTENERS
Our tops can be manufactured in many different arrangements to suit individual classroom needs. Cederquist joint fasteners permit tightening of the joint assembies and can be ordered for any application. Generally we recommend one fastener across each 12" of bench top. Thus a 24" wide top would require two fasteners. Drilling of holes beneath top included.
|
|
|
|
|
|
|
|
|
|
